EPM 110 Series Solid State Power Controller

The EPM-110 is a switching device that provides control for applying power to the load, while providing overcurrent and short-circuit protection for the load wiring.


  • 2 channel rated at 40 Amps to 85°C
  • Power up and continuous BIT
  • Serial data bus interface
  • Programmable ratings (25%, 50%, and 75% of the rated value) and trip parameters
  • Bounce free switching
  • Fast acting
  • Low voltage drop and power dissipation
  • Software-based design for added configuration
  • High voltage isolation
  • No derating for lamp, motor and inductive loads